Re: [sc-users] OSC Problem

[Tom Tlalim <ttlalim@xxxxxxxxx>]

hi chikashi miyama,
by the message you're getting it looks like you're sending messages to the server while joegendy is using OSCresponder which is on the language side.
make sure you're sending to port nr. 57120.
in max your outudp shoul look like this (except for the ip address):
[otudp write 127.0.0.1 57120]

grtz,
tom

otherwise

On 27 Aug 2005, at 02:31, Chikashi Miyama wrote:

> Hello.
>
> I just tried to connect Max/MSP4.5.4 and the latest SuperCollider3 from CVS on MaxOS10.4.2.
> I used "Joegendy"  by th for testing. but it doesn't work.
> Error messages are "FAILURE /max Command not found".
> The server recognize \quit or \dumpOSC message. but it dosen't understand original one.
> I could execute all SC3 sources by th without error.
>
> Besides. it prints storange output(I turned on dumpOSC) when I sent a message "/n_set 1002 amp 5" from Max/MSP
> Doesn't SuperCollider recognize Max Symbol as a string automatically?
>
> [ "#bundle", 1,
> [ "/n_set", 1002, 1634562048, 5 ]
> ]
>
> - I have already tried it with two computers with network
> - and I used also NetAddr instead of nil for OSCResponder
>
> Any idea?
>
> Thanks
>
> Chikashi Miyama
>
>
>
> > (
> > SynthDef(\gendy1, {arg pan=0, ampdist=1, durdist=1, adparam=1, ddparam=1, minfreq=30, maxfreq=100,
> > ampscale=0.3, durscale=0.05, initCPs=5, knum=12, mul=1.0, add=0;
> > var gendy, pansignal;
> >
> > gendy = Gendy1.ar(ampdist, durdist, adparam, ddparam, minfreq, maxfreq, ampscale, durscale, initCPs);
> > pansignal = Pan2.ar(gendy, pan);
> >
> > Out.ar(0, pansignal); // our output to the soundcard
> >
> > }).load(s)
> > )
> >
> > Synth(\gendy1) // try it! -- and kill it again with "apple + ."
> >
> > (
> > // Now you need to listen to Max using OSC.
> > // We create an OSCresponder:
> > o = OSCresponder(nil, '/max', { arg time, resp, msg;
> > [time, msg].postln; // comment this line out when performing - you see this in the post window
> > q.set(msg[1], msg[2]) // here we set the parameters of the synth
> > }).add;
> >
> > // Let's instantiate our synth:
> > q = Synth(\gendy1) // we put it into a variable "q" so we can
> > )
> >
> >
> >
> >
> >
> >
> > On 6 Jul 2005, at 11:31, Ricardo Guerreiro wrote:
> >
> >
> >
> > > Hello all
> > >
> > > I'm trying to use OSC with SC in order to send and receive control data to/from Max/Msp running in another computer. Is it possible? Where can I read about how to do it? I don't even know how to do it in the same machine...
> >
> >
> > There is a little example file here:
> >
> > http://www.ixi-software.net/content/backyard.html
> >
> > under the Code section called joeGendy
> >
> > which explains Max -> SuperCollider communication.
> >
> > have a look at that.
> _______________________________________________
> sc-users mailing list
> sc-users@xxxxxxxxxxxxxxx
> http://www.create.ucsb.edu/mailman/listinfo/sc-users
<x-tad-smaller>
..................
www.tomtlalim.tk
www.tangiercluj.tk
www.club-mtk.tk
..................</x-tad-smaller>